Ultra rigid box way for heavy cutting and long term accuracy Travels: 42" x 20.9" x 30.7"  w/16" Trunnion

CPV-1050B 4+1 w/ 16" Trunnion

+ Request Quote

+ Discover More

+ Download Brochure

 

MACHINE FEATURES

• Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.
• Box ways on all 3 axes greatly upgrades stability and dampening capability.
• Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.
• Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

Capacity

X axis travel: 42”

Y axis travel: 20.9”

Z axis travel: 30.7”

Allowable table load: 2200 pounds

Table T Slots - width x slot spacing: .708" x 3.937" - (5)

Trunnion Table

Table Diameter: 15.75"

Maximum Workpiece Diameter: 26.7"

Maximum Workpiece Height: 12.0"

Maximum Workpiece Weight: 220 pounds

Spindle

Spindle nose to table top: 3.9" - 34.6"

Spindle Bearing Diameter: 2.8"

Column to spindle center: 23.2"

Spindle taper: CAT 40 Big Plus

Spindle speed: 12,000 RPM

A.C. spindle motor (30 min.): 20 HP

Spindle torque (30 min): 132 FT-LBS.

Spindle Driving Method: Belt Drive

Automatic Tool Changer

ATC Type: Twin Arm Type

Number of Tools: 24

Tool Shank: CAT 40

Max. Tool Dia.: 3.1” (80 MM)

Max tool Diameter (No Adjacent Tool): 5.9” (150 MM)

Max. Tool Length: 9.8” (250 MM)

Max. Tool Weight: 15.4 lbs. (7 KG

Tool Selection: Random Bi-Directional

Motion

X and Y axis rapid traverse rate: 1,181 IPM (30 M/MIN)

Z axis rapid traverse rate: 1,181 IPM (30 M/MIN)

Cutting feed rate: 393 IPM (10 M/MIN)

Slide Type: Box Ways

Least command increment: .001mm,

Positioning accuracy: +/- .00020" (full stroke)

Repeatability: +/- .00008"

General

Floor Space Required (W x D): 125" x 96"

Height: 120"

Machine Weight: 13,700 lbs.

Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ

Power Capacity: 53 Amps Minimum

Air Source Requirement: 85 – 115 PSI

Standard Features

Fanuc Oi-F PLUS Control

AI APC Contour Control

12,000 RPM Spindle (Belt Drive)

Powerful 20 hp (30 min) high torque spindle motor

High Column (20.9” + 9.8”)

Cartridge Spindle Design

CAT40 Big Plus Spindle

290 PSI CTS

Spindle Air Blow

Rigid tapping

Custom Macro B (User Definable)

Twin Arm 24 Tool ATC

Portable Manual pulse generator

Massive One-piece Meehanite cast iron bed

Chip Auger

Low friction Turcite mating way surfaces

Double Anchored, Pre-tensioned Ballscrews

Fast 1,181 IPM Rapid Traverse rate

Full enclosure splash guard

Flood coolant with large coolant tank

Work light

Operator call lamp (red, yellow, green)

Spindle load meter

Assembly and operation tools

Auto Power Off

Heat exchanger for Electrical Cabinet

Instruction manual, parts list, and electrical diagram

Fanuc operator and maintenance manuals