Ultra rigid box way VMC for heavy cutting and long term accuracy
Travels: 62.9" x 32.6" x 27.5"
|
CPV-1600B - 50 Taper
MACHINE FEATURES
- Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy.
- Box ways on all 3 axes greatly upgrades stability and dampening capability.
- Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.
- Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.
Standard Features:
Balanced 6,000 RPM Spindle with spindle oil cooler 6000 BTU for High Speed Machining.
Hardened and Ground class C3 precision double-nut ballscrews (Ø40 mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
Precision scraping on both bonded Turcite-B and cast iron surfaces helps to reduce wearing out, maintaining operation accuracy. Hardened and ground slideways give an extra 40% wear resistance.
Capacity
X axis travel: 62.9"
Y axis travel: 32.6"”
Z axis travel: 27.5"
Table Loading Area: 70.8" X 31.4"
Allowable Table Load: 4,409 lbs
Table T Slots - width x slot spacing: .866” x 4.921” x 5
Spindle
Spindle nose to table top: 5.9" – 33.5"
Column to spindle center: 33.4"
Spindle taper: CAT 50 Big Plus
Spindle speed: 6,000 RPM
A.C. spindle motor (30 min.): 25 HP
Spindle torque (30 min): 384 ft-lbs
Spindle Driving Method: Geared Head Spindle
Automatic Tool Changer
ATC type: Twin Arm Type
Number of tools: 24
Tool Shank: CAT 50
Max tool dia.: 4.3”
Max tool diameter (No Adjacent Tool): 7.8”
Max tool length: 11.8”
Max tool weight: 33 lbs.
Tool Selection: Random Bi-Directional
Motion
X and Y axis rapid traverse rate: 590 IPM
Z axis rapid traverse rate: 472 IPM
Cutting feed rate: 393 IPM
Slide Type: Box Ways
Least command increment: .001mm
Positioning accuracy: +/- .00020" (full stroke)
Repeatability: +/- .00008"
General
Floor space required (W x D X H): 169" X 127.8" X 126"
Machine weight: 33,069 lbs.
Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ
Power capacity: 83 Amps Minimum
Air Source Requirement: 85 – 115 PSI (3/8 ID Supply Hose)