CNC Turning

Universal 2-Axis CNC Lathe w/ 6 in. chuck Travels: X: 5.9” + .78” / Z: 13.8”

CPL-106

6" Chuck 

 The CPL series is Campro’s highly flexible and profitable CNC Turning Center 

High performance linear motion guideways, One Piece, 45 Degree cast iron inclined bed to ensure quick chip evacuation. Our CPL series CNC Turning Center is based on a high quality one piece cast iron bed for superior rigidity and anti-vibration characteristics. 45 degree cast iron inclined bed ensures quick chip evacuation. The new CPMS (Campro Production Management System) represent the first step in smart manufacturing.

Working Area

Swing over bed: 17.7”

Swing over cross slides: 10”

Maximum turning diameter: 11.4”

Maximum turning length: 13.7”

Travel

X Axis Travel: 5.9” + .78”

Z Axis Travel: 13.8”

Rapid Traverse: 945 IPM 

Spindle

Spindle Motor: 10 / 15 HP

Maximum Speed: 6,000 RPM

Hydraulic Chuck: 6”

Spindle Nose: A2-5

Hole Through Draw Tube: 1.8”

Turret

O.D. / I.D.: .787” / 1.26”

Turret Type: 10 - Hydraulic

Tailstock

Quill Diameter: 2.75”

Quill Travel: 3.14”

Quill Taper: MT - #5

General

Floor Space Required (W X D): 117” X 63”

Machine Weight: 6,614 LBS

Standard Power Source: 205-235 Volts / 3 Phase / 60HZ

Power Capacity Minimum: 36 Amps (20 KVA)

Standard Features 

3-jaw, 6” hydraulic chuck

Manual tailstock

Chain type chip conveyor with bucket

Coolant system

Oil skimmer

Tool box

Instruction manual, parts list, and electrical diagram Fanuc operator and maintenance manuals

Universal 2-Axis CNC Lathe w/ 8 in. chuck Travels: X: 8.27” + .79” / Z: 22.44”

30 degree cast iron inclined bed ensures quick chip evacuation. The new CPMS (Campro Production Management System) represent the first step in smart manufacturing.

Working Area

Swing over bed: 22.84” (580 MM)

Swing over cross slides: 15.35” (390 MM)

Maximum turning diameter: 16.54” (420 MM)

Maximum turning length: 20.47” (550 MM)

Travel

X Axis Travel: 8.27” + .79” (210 + 20 MM)

Z Axis Travel: 22.44” (570 MM)

Rapid Traverse: 787 / 945 IPM (20 / 24 m/min)

Spindle

Spindle Motor: 15 / 20 HP (11 / 15 KW)

Maximum Speed: 4,200 RPM

Hydraulic Chuck: 8”

Spindle Nose: A2-6

Hole Through Draw Tube: 2.598” (66 MM)

Turret

O.D. / I.D.: .9842” / 1.5748” (25 / 40 MM)

Turret Type: 12 – Servo driven

Tailstock

Quill Diameter: 3.15” (80 MM)

Tailstock Travel: 1.81” (460 MM)

Quill Travel: 4.72” (120 MM)

Quill Taper: MT - #4

General

Floor Space Required (W X D): 151.14” X 76.77” (3,839 X 1,950 MM)

Height: 70.28” (1,785 MM)

Machine Weight: 9,150 LBS. (4,150 KG)

Standard Power Source: 205-235 Volts / 3 Phase / 60HZ

Power Capacity Minimum: 57 Amps (20 KVA)

Standard Features

3-jaw, 8” hydraulic chuck

Manual tailstock

Chain type chip conveyor with bucket

Coolant system

Oil skimmer

Tool box

Instruction manual, parts list, and electrical diagram Fanuc operator and maintenance manuals

Universal 2-Axis CNC Lathe w/ 10 in. chuck Travels: 29.5" x 16.9" x 18.9"

CPL-3510

10" Chuck 

Travels: X: 7.9” + .78” / Z: 27.5”

45 degree cast iron inclined bed ensures quick chip evacuation. The new CPMS (Campro Production Management System) represent the first step in smart manufacturing.

Working Area

Swing over bed: 22.4”

Swing over cross slides: 14.4”

Maximum turning diameter: 12.5”

Maximum turning length: 27.5”

Travel

X Axis Travel: 7.9” + .78”

Z Axis Travel: 27.5”

Rapid Traverse: 945 IPM

Spindle

Spindle Motor: 30 / 35 HP

Maximum Speed: 3,000 RPM

Hydraulic Chuck: 10”

Spindle Nose: A2-8

Hole Through Draw Tube: 3.00”

Turret

O.D. / I.D.: 1.0” / 1.57”

Turret Type: 10 - Hydraulic

Tailstock

Quill Diameter: 3.93”

Quill Travel: 4.72”

Quill Taper: MT - #5

General

Floor Space Required (W X D): 149” X 68”

Machine Weight: 12,126 LBS

Standard Power Source: 205-235 Volts / 3 Phase / 60HZ

Power Capacity Minimum: 74 Amps (30 KVA)

Standard Features

3-jaw, 10” hydraulic chuck

Manual tailstock

Chain type chip conveyor with bucket

Coolant system

Oil skimmer

Tool box

Instruction manual, parts list, and electrical diagram Fanuc operator and maintenance manuals

Live Tool CNC Turning Center w/ 10 in. main & 8 in. sub-spindle Travels: X: 8.27” + 1.18” / Z: 20.87”

NT-2510SM

Live Tool Lathe

The NT-2510SM is Campro’s highly flexible and profitable twin spindle CNC lathe.

Through the use of synchronized control, the 10” Main spindle / 8” Sub spindle can be utilized to complete the greatest amount of primary and secondary turning operations as possible, all in one compact platform. High performance heavy duty box guideways, 30 Degree cast iron inclined bed to ensure quick chip evacuation. Our NT-2510SM series CNC lathe is based on a high quality cast iron bed for superior strength and vibration characteristics. 30 deg. cast iron inclined bed ensure quick chip evacuation. The new CPMS (Campro Production Management System) represents the first step in smart manufacturing.

Swing over bed: 24.41” (620 MM)

Swing over cross slides: 18.11” (460 MM)

Maximum turning diameter: 16.54” (420 MM)

Maximum turning length: 20.47” (520 MM)

X Axis Travel: 8.27” + 1.18” (210 + 30 MM)

Z Axis Travel: 20.87” (530 MM)

Rapid Traverse: 945 ipm (24 / 24 m/min)

Hydraulic Chuck: 10"

Maximum Speed: 3,200 RPM

Hole Through Draw Tube: 3.00” (76.2 MM)

Spindle Nose: A2-8

Spindle Motor: 20 / 25 HP (15 / 18.5 KW)

Indexing of C Axis: .001 Degree

Hydraulic Chuck: 8"

Maximum Speed: 4,200 RPM

Hole Through Draw Tube: 2.047" (52 MM)

Spindle Nose: A2-6

Spindle Motor: 10 / 15 HP (7.5 / 11 KW)

Travel: 18.90” (480 MM)

Rapid Traverse: 590 IPM (15 M/MIN)

O.D. / I.D.:.9842” / 1.5748” (25 / 40 MM)

Turret Type: 12 – Servo

Maximum Tool Speed: 4,000 RPM

Floor Space Required (W X D): 167.5” X 88.82” (4,254 X 2,256 MM)

Height: 72.5” (1,842 MM)

Machine Weight: 10,472 LBS. (4,750 KG)

Standard Power Source: 205-235 Volts / 3 Phase / 60HZ

Power Capacity Minimum: 71 Amps (25 KVA)

Standard Features

3-jaw power chuck

Hard jaws = one set; Soft jaws = three sets

Manual tailstock

Chain type chip conveyor with bucket

Coolant system

Oil skimmer

Tool box

Instruction manual, parts list, and electrical diagram Fanuc operator and maintenance manuals

CNC Turning Center w/ Sub-Spindle and Y-axis

CPL-3010SY

The CPL-3010SY was designed to meet our customers’ needs for a flexible, highly productive and cost effective machine. The CPL-3010SY turning center is designed to provide superior rigidity, accuracy and surface finishes. Milling and drilling with live tooling, a true Y-Axis plus a sub-spindle adds to the versatility of this model. High-speed turret indexing, quick spindle acc./dec. times and fast rapid traverse rates minimize non-cutting time. Classic manufacturing methods and ultra rigid construction are combined with advanced technological features to provide exceptional value.

General Capacity

Maximum swing: 29.5”

Cross slide swing: 25.5”

Bar capacity (draw tube): 3.00”

Spindle speed: 4,000 rpm

Turret (Bi-directional): 12 stations

Cross travel (X axis): 10.23”

Longitudinal travel (Z axis): 33.4”

Cross travel( Y axis): 4.33”

Machine weight: 18,739 lbs.

Floor Space: 187” x 83”

Travel

X Axis Travel: 8.27” + 1.18” (210 + 30 MM)

Z Axis Travel: 20.87” (530 MM)

Rapid Traverse: 945 ipm (24 / 24 m/min)

Main Spindle

Standard chuck size: 10”

Spindle speed range: 25~4,000 rpm

Bar capacity (draw tube): 3.00”

Spindle nose: A2-8

Spindle Motor: 20 / 25 HP (15 / 18.5 KW)

Max. torque: 516 ft-lbs

Motor (30 min.): 30 Hp

Sub Spindle

Standard chuck size: 6”

Spindle speed range: 30~6,000 rpm

Full power range: 750~6,000 rpm

Bar capacity (draw tube): 1.26"

Spindle nose: A2-5 (Built In)

Motor (30 min.): 7.5 Hp

Max. torque: 52 ft-lbs

Turret

Tool positions: 12

Index time (1 face / full): 0.2 / 0.6 sec.

Coupling type: 3 Piece

Servo drive mechanism: Bi-directional, random call

Elelctric Supply

Voltage: 220 AC, 3phase, 60Hz

KVA: 26

Standard Features

Y axis 4.33”( +/- 2.16”)

Live Tooling with C-axis

Sub-spindle with Full C axis

Wide full power range 30 HP Built In Spindle Motor

3.00” Bar capacity

4,000 RPM Spindle

0.2 Second turret indexing

Rigid one piece box design bed

Separate 65 gallon coolant tank

Pretension ball screws with “Double anchored” support system on all three axes

787 IPM rapid traverse

18,739 Lbs. machine weight

FANUC 0iTF Control

CNC Lathe w/ Y-axis - 8 in. chuck

NT-208Y

Y-Axis Lathe

30 degree cast iron inclined bed ensures quick chip evacuation. The new CPMS (Campro Production Management System) represent the first step in smart manufacturing.

Working Area

Swing over bed: 26.74”

Swing over cross slides:16.35”

Maximum turning diameter: 15.74”

Maximum turning length: 20.47”

Travel

X Axis Travel: 8.66”

Y Axis Travel: 3.93”

Z Axis Travel: 24.8”

Rapid Traverse: 787 / 393 / 945 IPM

Spindle

Spindle Motor: 15 / 20 HP

Maximum Speed: 4,200 RPM

Hydraulic Chuck: 10”

Spindle Nose: A2-6

Hole Through Draw Tube: 2.05”

Turret

Tooling style: BMT-55

Turret Type: 12 – Servo driven

One Axial and one Radial BMT live holder included

Tailstock

Quill Diameter: 3.15”

Tailstock Travel: 1.81”

Quill Travel: 4.72”

Quill Taper: MT - #4

General

Floor Space Required (W X D): 151.14” X 76.77”

Height: 70.28”

Machine Weight: 9,150 LBS

Standard Power Source: 205-235 Volts / 3 Phase / 60HZ

Power Capacity Minimum: 57 Amps

Control Specifications – Fanuc OiM-F Conversational Control

8.4” color LCD screen Color graphics

Simultaneous Controlled Axis

Least input Increment on X and Z is .001 mm Least command increment on X and Z is .001mm Inch/Metric Conversion (G20/G21)

Interlock on All Axes Machine Lock on All Axes Emergency Stop

Stored Stroke Check 1, 2, 3, Mirror Image

Backlash Compensation

Unexpected disturbance torque detection Stored pitch compensation

Automatic Operation (Memory) MDI Operation

Search Function (Sequence, Program) Program restart

Dry Run Single Block Buffer Register

Manual Handle Interrupt

Manual Jog Feed (Rapid, Jog, Handle) Manual Handle Feed Rate (x1, x10, x100)

Feed Command (F Code Feedrate Direct Command) Feedrate Override 0-200% (10% Unit)

Jog feed 0-5,000 mm/min (197 ipm)

Rapid traverse override (F0, F25%, F50%, F100%) Override Cancel

Rapid Traverse Bell-Shaped Acceleration/Deceleration Block Skip

Exact Stop Mode / Exact Stop (G61/G09) Dwell (G04)

Helical Interpolation Threading/Synchronous Feed Manual Reference Point Return 1st Reference Point Return

G28 Reference Point Return Check

G27 2nd Reference Point Return

G30 3rd and 4th Reference Point Return

Compact microturning center for small precision parts

SPINNER PD Ultra-Precision Lathe offers the highest precision in a compact machine design.

More than 3.000 machines are delivered all around the world for

• Micro machining
• Hardturning of small workpieces
• diamond cutting
• Mass production with Automation

in applications for fine mechanics, optics, electronics, automotive and research.

Ultra-precision Turn-Mill Center with gang type tooling

MICROTURN-L is an ultra precision fine turning machine in a unique design to produce workpieces at the highest level.

The highly precise motorised spindle moving on an X/Z axis is the heart of the repeatability to achieve the highest accuracies.

In front of the spindle is a linear tool carrier for holding fixed precision turning tools for fine turning. In addition to turning tools, other units such as grinding spindles, deep-hole drilling devices or grippers can also be mounted on this for integrated automation.

All linear and rotary axes have direct measuring systems.

The MICROTURN is a unique concept on the market in this precision, MADE IN GERMANY at Spinner's main factory in Sauerlach near Munich.

Ultra-precision Turn-Mill Center with Y-Axis

MICROTURN-LT as a turning-milling centre is the combination of an ultra precision fine turning machine and a universal lathe in a unique design to produce workpieces at the highest level. The high-precision motorised spindle moving on an X/Z axis is the heart of the repeatability to achieve the highest accuracies.

Opposite the spindle are two different tool carriers:

• The linear tool carrier for holding fixed precision turning tools for ultra-fine turning.
• The turret with Y-axis at the bottom of the work area for more universal cutting operations All linear and rotary axes have direct measuring systems.

The MICROTURN is a unique concept on the market in accuracy and complexity, MADE IN GERMANY in our main factory near Munich.

Ultra-precision Turn-Mill Center with Y & B-Axis

MICROTURN-LTB as a turning-milling center is the combination of an ultra-precision fine turning machine with a 5-axis machining center in a unique design to produce workpieces at the highest level in only one clamping. The high-precision motorized spindles moving on an X/Z axis are the heart of the repeatability to achieve the highest accuracies.

Between the two spindles are three different tool carriers:

• The linear tool carrier for holding fixed precision turning tools for ultra-fine turning.
• The turret with Y-axis at the bottom of the work area for more universal cutting operations
• The milling spindle with Y- and B-axis at the top of the workspace for turning/milling applications with up to 72 tools
• All linear and rotary axes have direct measuring systems.

The MICROTURN is a unique concept on the market in terms of accuracy and complexity, MADE IN GERMANY in Spinner's main factory near Munich

Ultra-precision Turn-Mill Center with Y & B-Axis and subspindle

MICROTURN-LTBS Ultra-Precision Turn-Mill-Center is a combination between a submicron precsion lathe and a 5-axis Machining Center in unique design to produce highest level of workpieces in one operation only. The two oposite identical turning spindles moving in X/Z-axis are the heard of the precision repeatability for reaching closest tolerances. In between the two spindles are three toolholding devices such as

• Gang-type fixed table to wear fixed precision turning tools for submicron turning
• Turret with Y-axis in the bottom of working area for universal apllications0 Milling spindle with toolchanger, B-axis and Y-axis in upper working area for Turn-Mill applications with up to 72 tools
• All linear and rotative axis with linear scales.

There is no machine of similar precision and complexity on the market. Made in Germany in Spinner's Sauerlach-Munich Factory.

Ultra-precision Turn-Mill Center with grinding spindles

MICROTURN-GRIND is the first true combination of an ultraprecision hard turning machine and an internal and external grinding machine. With the MICROTURN-GRIND, you can not only fine-turn your workpieces with high precision in the hard condition (heat-treated), but also grind them using a 400 mm external grinding wheel and up to two high-performance internal grinding spindles. By using such a machine, you minimise stock oversizes required for grinding, reduce cycle times and optimise accuracies.

Hard machining of threads, recesses and contours is also possible thanks to the machine's full turning functionality with up to 10,000 rpm on the workpiece spindle or grinding of non-circular polygon shapes thanks to high-precision C-axis interpolation of the workpiece at creep speed.

The indexing turret mounted at the bottom of the work area allows high-precision soft and hard turning of internal and external contours on both spindle 1 and spindle 2. Milling operations with live tools and Y-axis are also possible, e.g. for soft and hard milling of surfaces, keyways and other contour elements - all during the same operation.

Compact design universal turning center

SPINNER TC300 is a most compact universal lathe with

• Box-way sliding guideways for usefull for hard-turning applications and long lifetime of tools
• Most modern and dynamic built-in motor spindle with water cooling
• Dynamic servo-turret with adjustable tool change speed by feed override
• very compact design with minimized outside dimensions
• Available optionally with Y-axis and subspindle

and is usually used for highly demanding workpieces from bar material or in chucking applications.

Compact design universal turning center

SPINNER TC400 is a most compact universal lathe with

• Box-way sliding guideways for usefull for hard-turning applications and long lifetime of tools
• Most modern and dynamic built-in motor spindle with water cooling
• Dynamic servo-turret with adjustable tool change speed by feed override
• very compact design with minimized outside dimensions
• Available optionally with Y-axis and subspindle

and is usually used for highly demanding workpieces from bar material or in chucking applications.

High performance universal turning center

SPINNER TC600 is a performance universal lathe with

• Box-way sliding guideways for usefull for hard-turning applications and long lifetime of tools
• Most modern and dynamic built-in motor spindle with water cooling
• Dynamic servo-turret with adjustable tool change speed by feed override
• very compact design with minimized outside dimensions
• Available optionally with Y-axis and subspindle

and is usually used for highly demanding workpieces from bar material or in chucking applications.

High performance universal turning center

SPINNER TC800 is a performance universal lathe with

• High cutting performance with high torque
• Box-way sliding guideways usefull for hard-turning applications and long tool life
• Most modern and dynamic built-in motor spindle (85mm) with water cooling
• Gear-box driven big bore spindle of 110mm for high torque applications
• Dynamic servo-turret with adjustable tool change speed by feed override
• capable for chucks up to 500mm
• Available with Y-axis or subspindle

and is usually used for highly demanding workpieces from bar material or in chucking applications. 

High performance universal turning center with extended Z-Axis stroke

SPINNER TC800L is a performance universal lathe with extended z-stroke and

• High cutting performance with high torque
• Box-way sliding guideways usefull for hard-turning applications and long tool life
• Most modern and dynamic built-in motor spindle (85mm) with water cooling
• Gear-box driven big bore spindle of 110mm or 175mm for high torque applications
• Dynamic servo-turret with adjustable tool change speed by feed override
• capable for chucks up to 500mm
• Available with Y-axis or subspindle

and is usually used for highly demanding workpieces from bar material or in chucking applications. 

High precision multi-tasking CNC lathes with 2 independent turrets

TTS-Duplex is a high performance Turning Center for simultanious machining with Two turrets with

• Main- and subspindle
• Y-axis
• Very dynamic axis
• Spinner made high speed servo-turrets
• Anti-vibration special damping system for higher cutting volume
• 90 degrees slant bed design for best chiop-removal

usually used for medium and high volume turning of complex workpieces.

High precision multi-tasking CNC lathes with 3 independent turrets

TTS-Triplex is a high performance Turning Center for simultanious machining with Two turrets with

• Main- and subspindle
• Two Y-axis
• Very dynamic axis
• Spinner made high speed servo-turrets
• Anti-vibration special damping system for higher cutting volume
• 90 degrees slant bed design for best chiop-removal

usually used for medium and high volume turning of complex workpieces.